Before
After
Dinesen Douglas Fir Sand and White Oil Finish
We were asked to complete a sand and application of Dinesen White Oil in a stunning house in Bluntisham, Cambridgeshire. Other contractors had installed the floor but were struggling with the recommended application of the Dinesen White Oil finish. As per the above picture there were some boot marks and also a spillage that needed to be removed. As the floor was a new install only a light sand was needed to remove any so-called “lipping”. The whole floor was fully sanded including edges and corners. The floor was then abraded with a 120 grit mesh screen disc before thoroughly vacuuming any remaining surface dust. As the floor was Douglas fir we applied Dinesen Lye as per Dinesen’s specifications. The floor was left over night to dry. The Dinesen Lye was buffed before again a thorough vacuum was carried out. Finally the Dinesen White Oil was applied as per Dinesen’s instructions.
This Dinesen Douglas Fir floor is now nice and clean and looking beautiful in the 100% Dinesen White Oil finish.